B&R 8LSA25.D8060S100-3 400VAC 6000RPM 0.52Nm Servo Motor EnDat Keyed Shaft

The B&R 8LSA25.D8060S100-3 is a compact 400 VAC synchronous servo motor for high-speed machine axes that require a keyed shaft and single-turn absolute encoder feedback.

This 6000 rpm motor delivers 0.520 Nm nominal torque in a 58 mm square flange design. The keyed 9 mm shaft is suitable for couplings, pulleys, timing-belt drives, and compact gearbox input arrangements where positive torque transmission is required.

The ECI 1119 FS EnDat 2.2 single-turn encoder provides position feedback for a compatible servo drive. This configuration is suited to fast repetitive positioning tasks where the axis returns to a known reference during machine startup.

This D100 version does not include a holding brake. It is more suitable for horizontal axes, supported rotary units, compact feeders, and lightweight motion mechanisms where the load does not need to be held after power removal.

Key Features

400 VAC synchronous servo motor

6000 rpm nominal speed

0.520 Nm nominal torque

0.600 Nm stall torque

EnDat 2.2 single-turn encoder

No holding brake

Keyed 9 mm shaft

58 mm square flange

40 mm centering diameter

Self-cooled construction

Compact high-speed servo configuration

Typical Applications

High-speed feeders

Labeling equipment

Compact packaging machinery

Small rotary positioning units

Timing-belt driven axes

Light assembly machinery

Printing and converting equipment

Servo motor replacement projects

Installation Notes

Confirm the original motor model, encoder type, shaft-key dimensions, flange size, centering diameter, and brake requirement before replacement.

This model has no holding brake. Do not use it for unsupported vertical loads unless the machine has an independent mechanical holding device.

Use a compatible B&R servo drive and ensure the EnDat encoder configuration matches the installed motor before commissioning.

FAQ

Q

Does 8LSA25.D8060S100-3 include a holding brake

A

No this model does not include a holding brake

Q

What encoder does this motor use

A

It uses an ECI 1119 FS EnDat 2.2 single-turn encoder

Q

Is the shaft smooth or keyed

A

It has a keyed 9 mm shaft

Q

What is the nominal speed

A

The nominal speed is 6000 rpm

Q

What is the nominal torque

A

The nominal torque is 0.520 Nm