B&R 8LSA35.R2060D100-3 400VAC 6000RPM 1.6Nm Servo Motor Resolver Keyed Shaft

The B&R 8LSA35.R2060D100-3 is a 400 VAC synchronous servo motor for high-speed machine axes that require resolver feedback and a keyed shaft connection.

This version operates at 6000 rpm nominal speed and provides 1.600 Nm nominal torque. The 14 mm keyed shaft is suitable for timing-belt drives, mechanical couplings, pulleys, and compact gearbox inputs where positive torque transmission is required.

The motor uses an R2 two-pole resolver for position and speed feedback. This feedback configuration is suited to installed motion systems designed around resolver-based motor connections.

This D100 configuration has no holding brake. It is appropriate for horizontal axes, supported rotary assemblies, compact feeders, and other mechanisms that do not need the motor shaft to remain mechanically locked after drive power is removed.

Key Features

400 VAC synchronous servo motor

6000 rpm nominal speed

9000 rpm maximum speed

1.600 Nm nominal torque

2.300 Nm stall torque

9.200 Nm maximum torque

R2 two-pole resolver feedback

No holding brake

Keyed 14 mm shaft

91.3 mm square flange

Self-cooled construction

Typical Applications

High-speed packaging equipment

Servo feeders

Labeling machinery

Printing and converting systems

Rotary indexing mechanisms

Compact assembly machines

Timing-belt positioning axes

Servo motor replacement projects

Installation Notes

Confirm the original motor model, resolver type, shaft-key dimensions, flange size, centering diameter, and brake requirement before replacement.

This model has no holding brake. Do not install it on an unsupported vertical axis unless the machine includes an independent mechanical holding device.

Use a compatible servo drive and verify resolver feedback wiring before commissioning.

FAQ

Q

Does 8LSA35.R2060D100-3 include a holding brake

A

No this model does not include a holding brake

Q

What feedback device does this motor use

A

It uses an R2 two-pole resolver

Q

What is the nominal speed

A

The nominal speed is 6000 rpm

Q

What is the nominal torque

A

The nominal torque is 1.600 Nm

Q

Is the shaft smooth or keyed

A

It has a keyed 14 mm shaft