B&R 8LVA13.B1030D000-0 80VDC 3000RPM 0.32Nm Servo Motor Multi Turn Encoder

The B&R 8LVA13.B1030D000-0 is a compact 80 VDC synchronous servo motor for low-voltage motion systems with limited installation space and low moving mass.

This motor operates at 3000 rpm nominal speed and provides 0.320 Nm nominal torque. Its compact mechanical design is suited to lightweight rotary axes, small feed mechanisms, compact inspection devices, and low-load positioning assemblies.

The B1 2.2 battery-buffered inductive multi-turn encoder provides position feedback over multiple shaft revolutions. This makes the feedback configuration important when replacing a motor in an existing low-voltage servo system.

This D000 version has no holding brake and a smooth shaft. It is best suited to horizontal or mechanically supported axes where the machine does not require the motor to hold a load after power removal.

Key Features

80 VDC low-voltage synchronous servo motor

3000 rpm nominal speed

0.320 Nm nominal torque

0.360 Nm stall torque

1.000 Nm maximum torque

B1 2.2 multi-turn encoder

Battery-buffered position feedback

No holding brake

Smooth shaft design

IP54 protection class

Self-cooled construction

Compact servo motor format

Typical Applications

Compact packaging machinery

Small feeder mechanisms

Labeling equipment

Lightweight rotary axes

Assembly stations

Inspection equipment

Small transfer modules

Low-voltage servo retrofit projects

Installation Notes

Confirm the original motor model, voltage class, encoder type, shaft design, centering diameter, and brake requirement before replacement.

This motor is designed for an 80 VDC low-voltage servo system. Do not connect it to a 400 VAC servo drive.

Because this version has no holding brake, do not use it for unsupported vertical loads unless the machine includes an independent mechanical holding method.

FAQ

Q

Is 8LVA13.B1030D000-0 a 400 VAC servo motor

A

No it is an 80 VDC low-voltage synchronous servo motor

Q

Does this model include a holding brake

A

No this version has no holding brake

Q

What feedback system does it use

A

It uses a B1 2.2 battery-buffered inductive 16-line multi-turn encoder

Q

What is the nominal torque

A

The nominal torque is 0.320 Nm

Q

Is the shaft smooth or keyed

A

It has a smooth shaft