Rexroth MSK100C-0200-NN-M1-BG0-NNNN Servo Motor 38Nm B-Side Plain

This MSK100C configuration provides the motor element for a higher-load feed or positioning axis designed around the 0200 winding. Its B-side power-connector orientation is fixed by the order code, unlike the rotatable connector arrangement of smaller MSK frames. The plain shaft and brake-free configuration also need to match the installed mechanical assembly.

Application and Selection

Consider this configuration for higher-load feed mechanisms where the machine specification already calls for MSK100C-0200. For a new axis or a changed load, compare the required speed-torque envelope, acceleration cycle, cooling conditions and mechanical drawing before selection. The motor frame alone does not establish suitability.

Cable clearance is a purchasing issue for this configuration, not just an installation detail. A different connector orientation can prevent the offered motor from fitting the existing cable route.

Key Features

• 38 Nm continuous standstill torque at 60 K, with a separate 148 Nm maximum torque limit.
• Optical multiturn absolute Hiperface, 128 signal periods; the feedback variant is part of the complete order code.
• Plain shaft with shaft sealing ring; power connector toward b-side.
• Brake-free configuration for installations that do not require an integral holding brake.

Supply and Inquiry Information

Request a quotation for MSK100C-0200-NN-M1-BG0-NNNN, material number R911317043. Send the required quantity, delivery country and postal code, preferred condition, and requested arrival date. For a breakdown replacement, attach readable photographs of the original nameplate, shaft and connectors, together with the machine and drive identification.

Ask the offer to confirm the 0200 winding, M1 feedback and BG0 configuration explicitly. The quotation should identify the actual offered unit, condition, price, delivery estimate and included items. Availability and commercial terms require confirmation for the specific request; the product description is not a stock reservation.

If cables, a coupling, a shaft key or inspection records are needed, list them separately in the RFQ. Request nameplate and condition photographs before order approval, and agree any functional-test evidence, packing requirements and warranty terms in writing.

Compatibility and Replacement Note

Match the complete motor code and material number first. Then check the mechanical interface, drive feedback support, winding data, brake circuit where fitted, cables and machine parameter set. An HCS or HMS designation alone does not establish compatibility. Any proposed alternative needs separate engineering approval and commissioning checks.

Buying and Replacement FAQ

Q1. What should I send to obtain a quote for MSK100C-0200?

Use the full code MSK100C-0200-NN-M1-BG0-NNNN and reference R911317043. Include quantity, destination and required date. A clear nameplate photograph helps prevent a different encoder, winding or shaft option from being quoted.

Q2. Can an A-side connector version be delivered for this BG0 motor?

Only if the revised cable route and installation clearance have been approved. B identifies the B-side power-connector orientation. Keep BG0 explicit when a like-for-like spare is required.

Q3. What evidence should I request for the BG0 configuration?

Ask for readable nameplate and connector photographs plus a shaft-end image. Confirm the plain shaft with shaft sealing ring and power connector toward b-side. Confirm that the offered unit is the brake-free version; do not approve a brake-equipped substitute without checking the revised assembly.

Q4. Can my existing servo drive operate this replacement?

Provide the complete drive and control-section codes, firmware information and original motor details. The review must cover the 0200 winding and M1 feedback as well as cables and machine parameters. Do not approve a motor solely because both products belong to the same drive family.

Q5. Are connection cables and mechanical accessories included?

The model identifies the motor configuration, not a complete installation kit. Ask the quotation to list the motor, cables, coupling and any separate shaft key individually. For the plain shaft, check the existing coupling bore and clamping arrangement rather than assuming a coupling will be supplied.

Q6. How are availability, condition and delivery confirmed?

Request a written offer against R911317043 stating the full model, offered condition, quantity, delivery estimate and validity. Agree required photos or test evidence before payment. If the exact item is unavailable, require any alternative to be identified separately and reviewed before acceptance.