Product Details
Brand Name: FANUC
Model Number: A860-2150-V001
Payment & Shipping Terms
Component Category: |
Spindle Feedback Sensor Head Assembly |
Sensor Designation: |
BZi |
Referenced Sensing Element: |
512 Teeth |
Referenced Cable Length: |
1.2 M |
Application: |
Selected Built-in Spindle Feedback Systems |
Part Function: |
Rotational Position Sensing |
Installation Requirement: |
Sensor-to-rotor Alignment Per Spindle Service Procedure |
Scope Of Supply: |
Sensor Head Assembly; Accessories Must Be Confirmed |
Component Category: |
Spindle Feedback Sensor Head Assembly |
Sensor Designation: |
BZi |
Referenced Sensing Element: |
512 Teeth |
Referenced Cable Length: |
1.2 M |
Application: |
Selected Built-in Spindle Feedback Systems |
Part Function: |
Rotational Position Sensing |
Installation Requirement: |
Sensor-to-rotor Alignment Per Spindle Service Procedure |
Scope Of Supply: |
Sensor Head Assembly; Accessories Must Be Confirmed |
The FANUC A860-2150-V001 is a BZi spindle position-feedback sensor head assembly, not a conventional servo motor pulse coder. Parts references describe it as a 512-tooth BZi sensor head with a 1.2 m cable. It is used in selected spindle feedback arrangements where the sensor and matching rotating element work together to report position information. For replacement, the complete part number, cable routing, connection and associated spindle sensor geometry must be verified, especially when servicing an older built-in spindle motor.
A860-2150-V001 is intended for a particular spindle sensor arrangement. A BZi sensor head works with the corresponding rotating target to provide the feedback information used by the spindle-control system. When this sensor is damaged or out of alignment, the machine may show spindle feedback errors, unstable control or position-related faults. The technician should inspect the cable, target and mounting before concluding that the head itself has failed.
It is important not to present this part as an ordinary plug-in optical servo encoder. The A860-2150 family includes different sensor-head and cable configurations. The V001 version has been listed with a 512-tooth BZi arrangement and a 1.2 m cable; check both details against the original unit and the machine manual when selecting a spare.
The sensor head must match the original BZi feedback arrangement, mating target, cable length and connection. A860-2150-V001 and A860-2155-V001 should not be treated as substitutes based on similar names. The sensor gap and alignment must be set using the specific spindle maintenance instructions.
DENG FENG can handle procurement enquiries for FANUC A860-2150-V001. Please send the full encoder or sensor number, required quantity, destination country and a photograph of the original unit. We will confirm the currently available condition, quotation, inspection information, shipping lead time, warranty terms if applicable, and package contents. Prices are provided on request; no fixed price is published.
Q. Is A860-2150-V001 an ordinary servo pulse coder?
A. No. It is generally listed as a BZi spindle sensor head assembly.
Q. What does the 512-tooth reference mean?
A. It describes the matching BZi sensing arrangement in parts references; it is not a claim of 512 encoder pulses per revolution.
Q. Does the part include a cable?
A. Parts references list a 1.2 m cable, but the actual supplied assembly and connector must be verified.
Q. Can a similar BZi sensor head replace V001?
A. Not without checking the mating target, cable, fitting dimensions and controller requirements.
Q. What information is needed for a quotation?
A. Send the full sensor number, spindle motor model, cable photo and required quantity.
Q. Does replacement require sensor adjustment?
A. Correct alignment or sensor-gap setup may be necessary. Follow the relevant machine or spindle service procedure.
Tags: