Tokyo Keiki CR-06-5P0-30-JA-J 95 cm3/rev Hydraulic Motor with Square Flange Mount

The Tokyo Keiki CR-06-5P0-30-JA-J is a 95 cm3/rev hydraulic motor designed for high-torque, low-speed rotary drive systems. It is part of the CR Series internal gear motor range and is suitable for industrial and mobile equipment that requires stable torque output with a compact square-flange mounting arrangement.

This model operates at a rated working pressure of 18 MPa and delivers a rated torque of 245 N.m. Its rated flow is 60 L/min, with a maximum flow capacity of 80 L/min, making it suitable for controlled rotary drives where hydraulic flow, torque and shaft speed must be matched correctly.

The 5P0 configuration features a four-bolt square flange mount, Rc1/2 tapered threaded main ports and a 1 inch parallel output shaft with square key. This shaft arrangement is suitable for mechanical coupling to sprockets, pulleys, couplings and gearbox input shafts.

This model uses a standard internal drain arrangement. Confirm the complete model code, hydraulic port connection, shaft type and mounting pattern before replacing an existing motor.

Key Features

95 cm3/rev hydraulic displacement
245 N.m rated torque for low-speed rotary output
18 MPa rated working pressure
24 MPa maximum intermittent pressure
60 L/min rated flow capacity
80 L/min maximum flow capacity
4-bolt square flange mounting design
Rc1/2 tapered threaded hydraulic ports
1 inch keyed parallel output shaft
Internal drain configuration
Internal gear motor design
Suitable for industrial and mobile hydraulic circuits

Typical Applications

Conveyor and roller drive systems
Feeder and dosing machinery
Rotary tables and indexing systems
Winch and drum drive equipment
Agricultural machinery
Construction equipment
Material handling systems
Recycling and processing machinery

Installation and Selection Notes

Verify the complete CR-06 model code before ordering because CR Series motors differ in displacement, mounting style, main port configuration, output shaft design and drain arrangement. This version uses a four-bolt square flange mount and Rc1/2 tapered threaded ports. Confirm system pressure, flow, rotation direction, coupling alignment and shaft-load requirements before commissioning.

FAQ

Q: What is the displacement of CR-06-5P0-30-JA-J?
A: This model has a displacement of 95 cm3/rev.

Q: What mounting style does this motor use?
A: It uses a four-bolt square flange mounting configuration.

Q: What hydraulic ports are used on this model?
A: The motor uses Rc1/2 tapered threaded main ports.

Q: What shaft type is included?
A: This configuration uses a 1 inch parallel shaft with square key.

Q: Does this motor use an external drain line?
A: No. This model uses the standard internal drain configuration because no D code is included in the model number.