The Tokyo Keiki CR-09-2P0-30-D-JA-J is a 153 cm3/rev hydraulic motor designed for high-torque, low-speed rotary drive applications. It belongs to the CR Series internal gear motor range and is suitable for hydraulic systems that need stable torque output with a compact flange-mounted configuration.
This model provides a rated torque of 460 N.m at a rated working pressure of 21 MPa. It is intended for controlled rotary motion in equipment such as heavy-duty conveyors, feeders, winches, drum drives, rotary fixtures and industrial machinery.
The 2P0 configuration combines a 2-bolt flange mount, Rc1/2 tapered threaded main ports and a 1 inch parallel shaft with square key. This configuration is suitable for hydraulic circuits using tapered pipe fittings and mechanical drive components such as sprockets, couplings and pulleys.
The D designation identifies an external Rc1/8 drain port. The drain line should be routed with minimal restriction to help control housing pressure and maintain reliable shaft-seal operation.
Key Features
153 cm3/rev hydraulic displacement
High torque output for low-speed rotary drives
460 N.m rated torque
610 N.m maximum torque
21 MPa rated working pressure
28 MPa maximum intermittent pressure
60 L/min rated flow capacity
2-bolt flange mounting design
Rc1/2 tapered hydraulic main ports
1 inch keyed parallel output shaft
External Rc1/8 drain configuration
Suitable for industrial and mobile hydraulic machinery
Typical Applications
Heavy-duty conveyor drives
Feeding and dosing equipment
Winch and drum drives
Rotary tables and positioning units
Agricultural equipment
Construction machinery
Recycling and processing systems
Material handling equipment
Installation and Selection Notes
Confirm the complete model code before replacement because CR Series motors differ in displacement, port type, shaft style, mounting configuration and drain arrangement. This model uses Rc1/2 tapered main ports and a 1 inch keyed shaft. Connect the external drain line correctly and keep case back pressure within the specified limit. Verify system pressure, flow, rotation direction and shaft-load conditions before installation.
FAQ
Q: What is the displacement of CR-09-2P0-30-D-JA-J?
A: This CR-09 model has a displacement of 153 cm3/rev.
Q: What hydraulic ports are used on this model?
A: It uses Rc1/2 tapered threaded main ports.
Q: What shaft type does the 2P0 configuration use?
A: It uses a 1 inch parallel shaft with square key.
Q: Is this motor suitable for low-speed high-torque applications?
A: Yes. It is a CR Series internal gear hydraulic motor designed for high-torque, low-speed rotary drives.
Q: Does this motor have an external drain port?
A: Yes. The D designation identifies an Rc1/8 external drain port.
Your message must be between 20-3,000 characters!
