B&R 8EI2X2HWD10.0200-1 ACOPOS P3 Dual-Axis Servo Drive 2.2A 1kW per Axis

The B&R 8EI2X2HWD10.0200-1 is a dual-axis ACOPOS P3 servo drive developed for machines using two relatively small servo motors. Each motor connection delivers 1 kW continuous power, 2.2 A continuous current and up to 6 A peak current.

Compared with the 4.5 A dual-axis models, this version is better matched to compact positioning, feeding and handling axes where lower motor current is sufficient. Combining two axes in one 66 mm wide module also reduces cabinet space compared with using two separate single-axis drives.

The .0200 configuration is supplied with a one-row connector set and cover. The braking-resistor arrangement should be checked separately when ordering a replacement.

Key Features

• Two servo axes in one compact module
• 1 kW continuous power available on each motor connection
• 2.2 A continuous and 6 A peak current per axis
• Separate encoder and motor-brake connections for both axes
• Supports 200–480 VAC three-phase industrial supplies
• One-row connector set and cover included in the specified configuration
• No current derating at 5, 10 or 20 kHz under the stated nominal conditions

Typical Applications

• Small feeder and positioning mechanisms
• Labeling and inspection equipment
• Electronic assembly machines
• Dual-axis conveyor adjustment
• Compact pick-and-place equipment
• Replacement in existing low-current ACOPOS P3 systems

FAQ

Q1. How many motors can the 8EI2X2HWD10.0200-1 control?
It provides two motor connections and can control two servo axes.

Q2. What is its main difference from the 8EI4X5HWD10 series?
The 8EI2X2 model provides 2.2 A and 1 kW per axis. The 8EI4X5 version provides 4.5 A and 2 kW per axis.

Q3. Does the .0200 configuration include an integrated braking resistor?
The official product description lists a one-row connector set and cover but does not identify an integrated braking resistor as part of the supplied configuration. Check the drive label and braking hardware before installation.

Q4. Can it replace a single-axis 2.2 A drive?
Not directly. This is a dual-axis module, so the motor connections, encoder wiring, cabinet configuration and machine software must be evaluated.