B&R 80SD100XD.W0XX-01 ACOPOSmicro Two Axis Stepper Motor Module with Heat Sink

The B&R 80SD100XD.W0XX-01 is an ACOPOSmicro two-axis stepper motor module for cabinet-mounted motion systems. It controls two two-phase bipolar stepper motors through full-bridge output stages and connects to the automation system through X2X Link.

This W0XX version includes an integrated heat sink for applications where thermal management is important during continuous stepper operation. It operates from a 24 to 64 VDC supply and provides 10 A continuous current capability for the connected motor axes.

The module supports 256 microsteps per motor step, helping improve movement smoothness during low-speed positioning, feed motion, and indexing tasks. Holding current, boost current, and continuous current can be configured independently to match the connected motor and machine duty cycle.

Two 24 VDC digital inputs can be used as trigger inputs, while the integrated 24 VDC output can be used for machine-side status or control functions. The unit also supports holding-brake connection, enable control, and automatic motor identification.

This product is a two-axis stepper motor control module. It should not be described as a stepper motor, PLC, servo drive, encoder module, power supply, or standalone I/O module.

Key Features

Two-axis stepper motor control

Two-phase bipolar full-bridge output stage

X2X Link communication

24 to 64 VDC power supply range

10 A continuous current

256 microsteps per step

Integrated heat sink

Two trigger-capable digital inputs

One 24 VDC 1 A digital output

Holding-brake connection

Enable input

Automatic motor identification

Independent current configuration

Typical Applications

Dual-axis feeder systems

Packaging machinery

Labeling equipment

Indexing mechanisms

Dispensing machines

Compact assembly stations

Handling equipment

Stepper positioning systems

Industrial retrofit projects

Installation Notes

Install the module on a conductive and properly earthed mounting plate inside a grounded electrical cabinet.

Confirm that both connected motors are compatible two-phase bipolar stepper motors before wiring.

Verify the X2X Link arrangement, supply-voltage range, configured current values, brake wiring, enable circuit, and motor connection order before commissioning.

This W0XX version includes a heat sink but does not provide integrated encoder inputs. Use a different module version when encoder feedback is required.

Terminal blocks and cables are ordered separately and should match the original machine installation.

FAQ

Q

Is 80SD100XD.W0XX-01 a stepper motor

A

No it is a two-axis module used to control stepper motors

Q

How many motors can this module control

A

It supports two stepper motor connections

Q

Does this model include encoder inputs

A

No this W0XX version does not include integrated encoder input channels

Q

What is the purpose of the heat sink

A

The integrated heat sink supports thermal management during stepper motor operation

Q

What communication interface does it use

A

It uses X2X Link communication

Q

What power supply range is required

A

The module operates from 24 to 64 VDC with ±25% tolerance

Q

Are terminal blocks included

A

No terminal blocks must be ordered separately