Highlight:
Product Series: |
B&R X20 System |
Product Type: |
Analog Input Module |
Number Of Input Channels: |
2 |
Signal Type: |
Voltage Or Current |
Voltage Input Range: |
±10 V |
Current Input Range: |
0 To 20 MA |
Input Configuration: |
Current Or Voltage For Entire Module |
Converter Resolution: |
16 Bit |
Input Type: |
Differential Input |
Minimum Conversion Time: |
40 μs For All Inputs |
Conversion Time Configuration: |
0.02 μs Steps |
Oversampling Function: |
Up To 16 Values Per Channel |
Timestamp Function: |
Timestamp For Last Conversion Of X2X Link Cycle |
Input Filter: |
Third Order Low Pass Filter 10 KHz |
Common Mode Range: |
±12 V |
Electrical Isolation: |
Channel Isolated From Bus |
Protection Class: |
IP20 |
Required Bus Module: |
X20BM11 Or X20BM15 |
Required Terminal Block: |
X20TB06 Or X20TB12 |
B&R X20AI2636 2 Channel 16 Bit Analog Input Module ±10V 0-20mA Oversampling
The B&R X20AI2636 is a two-channel analog input module for the X20 automation system. It is designed to acquire voltage or current signals from machine sensors, transmitters, process instruments, and external measurement devices.
Each channel can be used for ±10 V voltage signals or 0 to 20 mA current signals through the appropriate terminal connection. The module uses 16-bit conversion to support detailed analog signal processing within the connected X20 controller system.
The main difference between X20AI2636 and the standard X20AI2632 module is its oversampling capability. X20AI2636 can capture up to 16 analog values per channel internally, making it suitable for machine applications where signal changes must be observed more frequently within an X2X Link cycle.
The module also provides a timestamp for the final conversion in each X2X Link cycle. This feature can help coordinate rapidly changing analog measurements with controller timing in high-speed automation applications.
This product is an analog input module only. It should not be described as a safety module, servo drive, POWERLINK driver, PLC, power supply, or motion controller.
Key Features
Two analog input channels
±10 V voltage input support
0 to 20 mA current input support
16-bit converter resolution
Differential analog inputs
40 μs minimum conversion time
Configurable conversion timing
Oversampling up to 16 values per channel
Timestamp for X2X Link cycle conversion
Third-order 10 kHz input filter
Channel-to-bus electrical isolation
Compact X20 I/O module format
Typical Applications
Pressure transmitter signal acquisition
Flow measurement systems
Temperature transmitter monitoring
Tension control systems
Process measurement equipment
High-speed machine monitoring
Packaging machinery
Industrial test equipment
X20 automation system expansion
Installation Notes
Install the X20AI2636 on a compatible X20 bus module and use the correct terminal block for the required analog wiring.
Select the input signal type according to the connected sensor or transmitter. Confirm whether the external device provides a voltage signal or current signal before wiring.
Use shielded analog signal wiring where required by the machine installation and keep analog cables separated from high-current motor or switching cables.
The module supports oversampling functions, but the controller project and X2X Link configuration must be matched to the required sampling behavior before commissioning.
FAQ
Q
Is X20AI2636 a PLC controller
A
No it is a two-channel analog input module for the X20 automation system
Q
What analog signals can this module receive
A
It supports ±10 V voltage signals and 0 to 20 mA current signals
Q
How many input channels are included
A
It has two analog input channels
Q
What is the converter resolution
A
It uses 16-bit digital conversion
Q
Does X20AI2636 support oversampling
A
Yes it can record up to 16 analog values per channel internally
Q
Are terminal blocks included
A
No the X20TB06 or X20TB12 terminal block must be ordered separately
Your message must be between 20-3,000 characters!
