Danfoss 134F7258 VLT FC 302 0.75kW EtherNet/IP Variable Frequency Drive 380–500V IP20

The Danfoss 134F7258 is a compact VLT AutomationDrive FC 302 variable frequency drive configured for precise speed and torque control in industrial automation systems. Its complete model designation is FC-302PK75T5E20H1XNCXXXSXXXXANBXCXXXXDX.

Rated at 0.75 kW or 1.0 HP, this frequency converter operates from a three-phase 380–500 V AC supply. It is designed for controlling compatible asynchronous motors and permanent magnet motors in machinery where accurate motor response, flexible communication and reliable process control are required.

Unlike a basic FC 302 configuration, order code 134F7258 includes an EtherNet/IP communication option. This allows the drive to exchange control commands, operating values and diagnostic information with compatible industrial controllers through an Ethernet-based automation network.

The IP20 chassis enclosure is intended for protected installation inside an electrical control cabinet. Its compact A2 frame helps reduce cabinet space while providing the advanced motor-control functions associated with the FC 302 platform.

A coated printed circuit board provides improved protection for the internal electronics in demanding industrial environments. This configuration also includes a numeric local control panel for parameter access, commissioning and status monitoring directly at the drive.

The 134F7258 is supplied without an integrated brake chopper. Applications requiring rapid deceleration or regenerative braking should therefore be reviewed carefully before installation. The motor load, braking duty and stopping requirements must be checked to determine whether an alternative configuration or external braking solution is required.

This drive is suitable for new automation projects, machine upgrades and replacement of an existing unit with the same order code and model configuration. Before purchasing, verify the complete model string rather than relying only on the FC 302 series name.

Key Features

0.75 kW VLT AutomationDrive FC 302

Three-phase 380–500 V AC input

Integrated EtherNet/IP communication option

Advanced motor speed and torque control

Supports asynchronous and permanent magnet motors

IP20 chassis enclosure for cabinet installation

Compact A2 frame construction

RFI Class A1/B filter with C1 classification

Coated printed circuit board

Numeric local control panel

Standard software configuration

Suitable for centralized automation networks

Designed for precise industrial motion control

Model-specific replacement for order code 134F7258

Typical Applications

Conveyor systems

Packaging machinery

Material handling equipment

Industrial pumps

Ventilation fans

Mixing machinery

Textile production equipment

Printing machines

Food-processing equipment

Automated assembly lines

Machine-tool auxiliary drives

Warehouse automation systems

Process control machinery

Factory production equipment

EtherNet/IP Communication

The AN option contained in the full model code identifies an EtherNet/IP communication configuration.

This network option can be used to connect the drive to compatible programmable controllers and industrial automation networks. Depending on the controller and system configuration, EtherNet/IP communication may support:

Drive start and stop commands

Speed reference transmission

Operating status monitoring

Fault and alarm reporting

Process data exchange

Remote diagnostic access

Production-line integration

The controller, network topology and drive communication parameters must be configured correctly during commissioning.

Motor Control Functions

The FC 302 platform is designed for advanced control of industrial motors. Depending on the selected motor and parameter setup, it can support applications requiring:

Variable-speed operation

Controlled acceleration

Controlled deceleration

Torque regulation

Stable low-speed performance

Automatic motor adaptation

Motor protection monitoring

Process feedback control

Energy-efficient motor operation

The actual performance depends on correct motor data entry, wiring, parameter configuration and application engineering.

Compatibility Notice

Order code 134F7258 should be selected using the complete model designation:

FC-302PK75T5E20H1XNCXXXSXXXXANBXCXXXXDX

FC 302 drives with the same power rating may still have different:

Input voltages

Enclosure ratings

RFI filters

Brake options

Local control panels

PCB coatings

Fieldbus options

Safety options

I/O modules

Software configurations

Do not replace the unit based only on the FC 302 series name or 0.75 kW rating.

Installation Requirements

Install the drive inside a suitable electrical enclosure.

Maintain the required ventilation clearance.

Use correctly rated input and motor cables.

Connect protective grounding before applying power.

Verify the three-phase supply voltage.

Use shielded motor cable where EMC compliance is required.

Separate motor wiring from control and communication cables.

Configure the EtherNet/IP address and network settings.

Enter the correct motor nameplate data.

Confirm acceleration and deceleration times before operation.

Allow the DC-link capacitors to discharge before servicing.

Installation should be performed by qualified electrical personnel.

Important Braking Notice

This 134F7258 configuration does not include an integrated brake chopper.

For applications involving:

Rapid stopping

High-inertia loads

Vertical lifting motion

Frequent deceleration

Regenerative motor operation

The braking requirements must be calculated before selecting the drive. Do not connect a braking resistor unless the installed drive configuration is designed to support it.

FAQ

Q1: What is the rated power of Danfoss 134F7258?

A1: The drive is rated for 0.75 kW or approximately 1.0 HP motor applications.

Q2: What is the complete model number?

A2: The complete model designation is FC-302PK75T5E20H1XNCXXXSXXXXANBXCXXXXDX.

Q3: What input voltage does it require?

A3: It is designed for a three-phase 380–500 V AC mains supply.

Q4: Does this model support PROFIBUS DP?

A4: This specific configuration includes EtherNet/IP, identified by the AN option in the model code. PROFIBUS DP should not be listed as the standard communication option for order code 134F7258.

Q5: Does the drive include EtherNet/IP?

A5: Yes. The full model code contains the AN communication option, indicating an EtherNet/IP configuration.

Q6: What is the enclosure rating?

A6: It uses an IP20 chassis enclosure intended for installation inside a protected electrical cabinet.

Q7: Does it have a brake chopper?

A7: No. This configuration is supplied without an integrated brake chopper.

Q8: Does the unit include a control panel?

A8: Yes. This configuration includes a numeric local control panel for setup and operating-status access.

Q9: Is the printed circuit board coated?

A9: Yes. The configuration includes a coated PCB for improved environmental protection.

Q10: Can it control permanent magnet motors?

A10: The FC 302 platform is designed to control compatible asynchronous and permanent magnet motors when correctly configured.

Q11: Can another 0.75 kW FC 302 directly replace it?

A11: Not necessarily. The full model code must be compared because communication, enclosure, coating, brake and control-panel options may differ.

Q12: What information should be checked before ordering?

A12: Verify the order code, complete model string, motor power, supply voltage, communication protocol, brake requirements and enclosure type.