The Danfoss 131B5836 is a VLT AutomationDrive FC 302 variable frequency drive for three-phase 380 to 500 VAC machine power systems.
This version is rated for 2.2 kW motor applications and uses an IP20 chassis enclosure in A2 frame size. It is suitable for cabinet-mounted motor speed control in equipment that requires adjustable frequency operation and a graphical local control interface.
The drive includes an H1 RFI filter configuration and a graphical local control panel. It does not include a brake chopper, so braking requirements must be checked against the original machine design before replacement.
This specific configuration includes the MCO-305 SyncPos motion control option. That option is important when replacing an installed drive because the connected machine may use drive-based positioning or synchronization functions.
This product is a variable frequency drive. It should not be described as a servo motor, PLC, power supply module, standalone motion controller, or brake unit.
Key Features
2.2 kW variable frequency drive
Three-phase 380 to 500 VAC supply
IP20 chassis enclosure
A2 frame size
H1 RFI Class A1 and B C1 filter
Graphical local control panel
MCO-305 SyncPos motion control option
5.6 A continuous output current
8.96 A intermittent output current
No brake chopper
Standard cable-entry configuration
Cabinet-mounted VFD design
Typical Applications
Conveyor systems
Packaging machinery
Pumps and fans
Mixing equipment
Material handling systems
Process machinery
Speed-controlled AC motors
Machine retrofit projects
Installation Notes
Confirm the original part number, full type code, mains voltage, motor rating, control-panel type, and MCO-305 SyncPos option before replacement.
This model does not include a brake chopper. Check whether the original machine uses an external braking solution or whether braking is not required.
Install the drive in a grounded electrical control cabinet and retain the original wiring, shielding, motor-cable routing, and parameter backup where available.
Verify the application parameters, motor data, control terminals, and motion-control configuration before startup.
FAQ
Q
Is 131B5836 a servo drive
A
No it is a VLT AutomationDrive FC 302 variable frequency drive
Q
What motor power is supported
A
The rated motor power is 2.2 kW
Q
What input voltage is required
A
It operates from three-phase 380 to 500 VAC supply
Q
Does this model include a brake chopper
A
No this configuration does not include a brake chopper
Q
Does this drive include a local control panel
A
Yes it includes a graphical local control panel
Q
What motion option is included
A
It includes the MCO-305 SyncPos motion control option
Your message must be between 20-3,000 characters!
