The B&R 80SD100XD.C044-01 is an ACOPOSmicro stepper motor module designed to operate two two-phase bipolar stepper motors in an X2X Link automation system.
This version is intended for applications using 24 V incremental encoder feedback on both axes. The two encoder inputs allow the machine controller to receive pulse-based position information from connected motion axes, making the module suitable for synchronized feed, indexing, and positioning tasks.
The module operates from a 24 to 64 VDC supply and provides 10 A continuous current capability. Each motor channel uses a bipolar full-bridge output stage and supports up to 256 microsteps per motor step for smoother movement at low speed.
The 80SD100XD.C044-01 also includes two trigger-capable digital inputs, one 24 VDC digital output, holding-brake wiring, enable control, and automatic motor identification. It is intended for installation on a conductive and grounded mounting plate inside an electrical cabinet.
This product is a two-axis stepper motor control module. It should not be described as a stepper motor, PLC, servo motor, power supply, HMI, or standalone I/O module.
Key Features
Two-axis stepper motor control
Two-phase bipolar full-bridge output stage
X2X Link communication
Two 24 V incremental encoder inputs
24 to 64 VDC power supply range
10 A continuous current
256 microsteps per step
Two trigger-capable digital inputs
One 24 VDC 1 A digital output
Holding-brake connection
Enable input
Automatic motor identification
Typical Applications
Dual-axis feeder systems
Labeling equipment
Packaging machinery
Indexing tables
Dispensing machines
Compact handling units
Assembly stations
Stepper positioning systems with incremental feedback
Industrial retrofit projects
Installation Notes
Install the module on a conductive and properly earthed mounting plate.
Confirm that both connected motors are compatible two-phase bipolar stepper motors and that the installed feedback devices use 24 V incremental encoder signals.
Before commissioning, verify X2X Link wiring, encoder wiring, supply voltage, motor current settings, brake connection, and enable circuit.
Terminal blocks and cables are ordered separately.
FAQ
Q
Is 80SD100XD.C044-01 a stepper motor
A
No it is a two-axis module used to control stepper motors
Q
How many motors can this module control
A
It supports two stepper motor connections
Q
What encoder type does this model support
A
It has two 24 V incremental encoder inputs
Q
Does it use X2X Link communication
A
Yes it includes an X2X Link interface
Q
What power supply range is required
A
The module operates from 24 to 64 VDC with ±25% tolerance
Q
Are terminal blocks included
A
No terminal blocks must be ordered separately
Your message must be between 20-3,000 characters!
