The B&R 80SD100XS.C04X-01 is a single-axis stepper motor module from the ACOPOSmicro range. It is designed to control one two-phase bipolar stepper motor through a full-bridge output stage.
This module is suitable for compact motion tasks where a stepper axis must be connected to an X2X Link automation structure. It supports a 24 V incremental encoder input, allowing encoder feedback to be used for motion monitoring and axis-related machine functions.
The module provides 256 microsteps per motor step, which supports smoother low-speed movement and more refined positioning behavior than full-step operation. Holding current, boost current, and continuous current can be configured independently to suit the installed motor and motion duty.
The 80SD100XS.C04X-01 also includes two digital trigger-capable inputs, one 24 VDC digital output, a holding-brake connection, and an enable input. It is intended for control-cabinet installation as part of a compatible B&R automation system.
This product is a stepper motor control module. It should not be described as a stepper motor, PLC, power supply module, servo motor, or HMI.
Key Features
Single-axis stepper motor control
Two-phase bipolar full-bridge output
X2X Link communication interface
24 to 64 VDC supply range
10 A continuous current
256 microsteps per step
24 V incremental encoder input
Two trigger-capable digital inputs
One 24 VDC digital output
Holding brake connection
Enable input
Automatic motor identification
Typical Applications
Labeling equipment
Small packaging machines
Feeding mechanisms
Indexing tables
Dispensing systems
Pick-and-place units
Light assembly equipment
Compact conveyor positioning systems
Stepper axis retrofit projects
Installation Notes
Install the module inside a correctly grounded control cabinet.
Confirm that the connected motor is a compatible two-phase bipolar stepper motor before wiring.
Verify the X2X Link configuration, encoder wiring, brake wiring, power-supply range, and configured current values before commissioning.
Terminal blocks are ordered separately and should match the original installation arrangement.
FAQ
Q
Is 80SD100XS.C04X-01 a stepper motor
A
No it is a module used to control one stepper motor
Q
How many motors can this module control
A
It supports one stepper motor connection
Q
Does the module support encoder feedback
A
Yes it includes one 24 V incremental encoder input
Q
What supply voltage is required
A
The module operates from 24 to 64 VDC with ±25% tolerance
Q
Does it support a holding brake
A
Yes it includes a motor holding-brake connection
Q
Are terminal blocks included
A
No terminal blocks must be ordered separately
Your message must be between 20-3,000 characters!
