HCS01.1E-W0028-A-03-B-ET-EC-NN-NN-NN-FW 28A Ethernet Drive

The HCS01.1E-W0028-A-03-B-ET-EC-NN-NN-NN-FW is a 28 A compact converter for higher-current HCS01 single-axis applications. Its integrated BASIC control section, ET MultiEthernet interface and EC multi-encoder input provide a concise drive package for machine builders and maintenance teams working with established IndraDrive Cs installations.

This NN safety configuration is intended for systems whose safety functions are handled elsewhere or whose original design specifies no drive-integrated safety option. The page should therefore emphasize the 28 A current class and communication and feedback hardware, without attributing STO, Safe Brake Control or Safe Motion to this exact order code.

Key Features

· 28 A maximum and 11.52 A continuous-current reference

· BASIC integrated power and control architecture

· ET MultiEthernet network hardware

· EC multi-encoder interface

· No safety option in the exact NN configuration

· High-current HCS01 performance in a 70 mm nominal width

Typical Applications

· Dynamic conveyor and indexing axes

· Packaging and converting machinery

· Handling and assembly systems

· Exact replacement of R911325248

Compatibility and Selection Note

The W0028 current class does not by itself define the complete drive. Compare BASIC versus ECONOMY control, ET versus S3 communication, NN versus L4 safety and the installed firmware before replacement.

Frequently Asked Questions

Q1 Is this the safety-equipped W0028 version?

No. This exact model has NN in the safety field. Select the L4 version when the original machine requires STO and Safe Brake Control.

Q2 How is it different from the ECONOMY S3 version?

This version uses a BASIC control section with ET MultiEthernet. The ECONOMY version uses Sercos III communication and a different control configuration.

Q3 Can it operate every 28 A application?

No. Motor voltage, continuous load, overload cycle, feedback, network and firmware must be validated for the machine.

Q4 Does the EC code define the motor connector?

EC identifies multi-encoder evaluation. Confirm the physical connector, pin assignment, encoder supply and cable for the installed motor.

Q5 Is an external mains choke always required?

The need for a choke and the available power depend on the mains and project design. Follow the official project planning data for the installation.

Q6 Which identifier is best for purchasing?

Use both the full order code and material number R911325248, then confirm the firmware and condition required.