Highlight:
Product Series: |
B&R X20 System |
Product Type: |
POWERLINK Bus Controller |
Network Role: |
POWERLINK V1/V2 Controlled Node |
Main Function: |
Connects X2X Link I/O Nodes To POWERLINK |
POWERLINK Interface: |
1 X POWERLINK Interface |
RJ45 Ports: |
2 X Shielded RJ45 Ports |
Hub Function: |
Integrated 2 Port Hub |
Ethernet Physical Layer: |
100BASE-TX |
Transfer Rate: |
100 Mbit/s |
Maximum Segment Length: |
100 M Between Two Stations |
Auto Negotiation: |
Supported |
Auto MDI/MDIX: |
Supported |
Minimum POWERLINK Cycle Time: |
200 μs |
Minimum X2X Link Cycle Time: |
200 μs |
X2X Link Synchronization: |
1 To 1 Or Synchronous By Prescaler |
Dynamic Node Allocation: |
Supported |
Bus Power Consumption: |
2 W |
Protection Class: |
IP20 |
Operating Temperature: |
-25 To 60°C Horizontal Mounting |
Required Bus Base: |
X20BB80 |
Required Power Supply Module: |
X20PS9400 Or X20PS9402 |
Required Terminal Block: |
X20TB12 |
B&R X20BC0083 POWERLINK Bus Controller for X2X Link I/O with 2 Port RJ45 Hub
The B&R X20BC0083 is a POWERLINK bus controller for distributed X20 I/O systems. It is used to connect an X2X Link I/O station to a POWERLINK network as a controlled node.
The controller includes two shielded RJ45 ports with an integrated hub function. This allows POWERLINK wiring to pass through the module without requiring a separate external hub for basic line topology connections.
The X20BC0083 supports POWERLINK V1 and V2 communication at 100 Mbit/s using 100BASE-TX. It can operate the X2X Link cycle synchronously with POWERLINK in a one-to-one relationship or by using a prescaler, depending on the machine communication design.
This product is intended for remote I/O communication. It is not a PLC controller, servo drive, safety controller, power supply module, or standalone Ethernet switch.
Key Features
POWERLINK V1 and V2 controlled node
Connects X2X Link I/O to POWERLINK
Integrated two-port RJ45 hub
Two shielded RJ45 ports
100 Mbit/s transfer rate
100BASE-TX communication
200 μs minimum POWERLINK cycle time
200 μs minimum X2X Link cycle time
Dynamic node allocation support
I/O configuration via fieldbus
Firmware update via fieldbus
IP20 cabinet installation
Typical Applications
Distributed X20 I/O stations
Packaging machinery
Assembly equipment
Conveyor systems
Material handling equipment
Production line expansion
Machine retrofit projects
Remote I/O network installations
Installation Notes
Install the X20BC0083 on the required X20BB80 bus base inside a properly grounded electrical cabinet.
Use the required X20PS9400 or X20PS9402 power supply module and X20TB12 terminal block.
Confirm the POWERLINK node configuration, network topology, cable routing, X2X Link I/O arrangement, and controller project settings before commissioning.
Do not describe this module as a PLC, servo driver, safety module, motion controller, or standard Ethernet switch.
FAQ
Q
What is X20BC0083 used for
A
It connects X2X Link I/O nodes to a POWERLINK network
Q
Is X20BC0083 a PLC controller
A
No it is a POWERLINK bus controller for distributed X20 I/O
Q
How many RJ45 ports are included
A
It has two shielded RJ45 ports with integrated hub function
Q
Does it support POWERLINK V1 and V2
A
Yes it operates as a POWERLINK V1/V2 controlled node
Q
What is the communication speed
A
The transfer rate is 100 Mbit/s
Q
What accessories are required
A
X20BB80 bus base, X20PS9400 or X20PS9402 power supply module, and X20TB12 terminal block are required
Your message must be between 20-3,000 characters!
