ELAU iSH070/60022/0/1/00/0/10/10/00 2.2Nm Keyed Shaft Multiturn IP65 Integrated Servo Motor

The ELAU iSH070/60022/0/1/00/0/10/10/00 is a decentralized PacDrive iSH servo module that combines a synchronous motor, power stage, digital servo controller, feedback system, and electronic type plate in one motor-mounted assembly. Its iSH070/60022 motor body provides 2.2 Nm standstill torque and 8.7 Nm peak torque, with 1.15 Nm rated torque at 6000 rpm and 0.72 kW rated output.

This exact suffix specifies the keyed shaft, SinCos SKM36 multiturn absolute feedback, without a holding brake, and shaft sealing fitted, IP65 shaft and housing configuration. The configuration supports decentralized packaging axes that need a keyed shaft, multiturn position information, and improved shaft-side sealing without a brake. It differs from other iSH070/60022 pages through the /10 sealing code and /10 encoder-brake code, providing shaft sealing, multiturn feedback, and no brake. Reference VIA0703D32A0000 may also appear on the type plate or in installed-system records, but the complete iSH type code remains the primary selection key.

Key Features

· Motor, power amplifier, servo controller, and electronic type plate integrated at the axis

· 2.2 Nm standstill torque with 6000 rpm rated speed

· Keyed shaft and shaft sealing fitted, IP65 shaft and housing configuration

· SinCos SKM36 multiturn absolute feedback for decentralized position control

· Without holding brake in the exact encoder-brake configuration

· Hybrid connection reduces separate cabinet drive hardware and axis cabling

Typical Applications

· Decentralized packaging machine axes

· Keyed conveyor and roller drives

· Washdown-adjacent machine zones subject to the verified protection limits

· Distributed labeling and handling modules

· Replacement in PacDrive iSH070/60022 systems

Compatibility and Selection Note

This model belongs to the legacy PacDrive iSH architecture and must be matched by the complete code iSH070/60022/0/1/00/0/10/10/00. Confirm PS-5 and DB-5 system compatibility, hybrid cable pinout, SERCOS topology, controller project, DC bus, 24 V control supply, shaft interface, sealing, encoder type, brake wiring, and optional-module code. A separate SH motor or a different iSH suffix is not a direct substitute. Compare the installed type plate and reference VIA0703D32A0000 before order.

FAQ

What is important about the two /10 codes in this model?

The first /10 identifies the sealed shaft and standard housing combination. The second /10 identifies multiturn feedback without a holding brake.

Which shaft configuration does this exact model use?

It uses a keyed shaft. The coupling, hub, key, axial retention, and permitted shaft loads must match this mechanical version.

What feedback device is specified?

The exact configuration uses SinCos SKM36 multiturn absolute feedback. The controller project and feedback interface must be checked before replacement.

Does this model include a holding brake?

No. This exact suffix does not include a holding brake. The machine must provide a safe means of retaining any gravity-loaded or mechanically unstable axis.

Is this iSH model only a motor?

No. The iSH assembly integrates the motor, power stage, digital servo controller, feedback, and electronic type plate. It operates within the matching PacDrive iSH power and communication system.

What should be verified before ordering a replacement?

Compare iSH070/60022/0/1/00/0/10/10/00, reference VIA0703D32A0000, shaft, sealing, encoder, brake, hybrid connector, PS-5 and DB-5 architecture, SERCOS layout, firmware, and controller project. The complete suffix must match.