ELAU iSH070/60011/0/0/00/0/00/00/00 1.1Nm Compact Smooth Shaft Singleturn Integrated Servo Motor

The ELAU iSH070/60011/0/0/00/0/00/00/00 is a decentralized PacDrive iSH servo module that combines a synchronous motor, power stage, digital servo controller, feedback system, and electronic type plate in one motor-mounted assembly. Its iSH070/60011 motor body provides 1.1 Nm standstill torque and 3.5 Nm peak torque, with 0.5 Nm rated torque at 6000 rpm and 0.31 kW rated output.

This exact suffix specifies the smooth shaft, SinCos SKS36 singleturn absolute feedback, without a holding brake, and no shaft seal, IP54 shaft side except IP40 in IM V3, IP65 housing. The configuration supports small decentralized axes where minimum size, low inertia, and a simple smooth-shaft singleturn configuration are preferred. It differs from other iSH070/60011 pages through the smallest iSH070 torque body with no shaft seal, singleturn feedback, and no brake. Reference VIA0701D01A0000 may also appear on the type plate or in installed-system records, but the complete iSH type code remains the primary selection key.

Key Features

· Motor, power amplifier, servo controller, and electronic type plate integrated at the axis

· 1.1 Nm standstill torque with 6000 rpm rated speed

· Smooth shaft and no shaft seal, IP54 shaft side except IP40 in IM V3, IP65 housing

· SinCos SKS36 singleturn absolute feedback for decentralized position control

· Without holding brake in the exact encoder-brake configuration

· Hybrid connection reduces separate cabinet drive hardware and axis cabling

Typical Applications

· Small product-feed axes

· Compact labeling stations

· Light pick-and-place mechanisms

· Decentralized adjustment and dosing units

· Replacement in iSH070/60011 machine modules

Compatibility and Selection Note

This model belongs to the legacy PacDrive iSH architecture and must be matched by the complete code iSH070/60011/0/0/00/0/00/00/00. Confirm PS-5 and DB-5 system compatibility, hybrid cable pinout, SERCOS topology, controller project, DC bus, 24 V control supply, shaft interface, sealing, encoder type, brake wiring, and optional-module code. A separate SH motor or a different iSH suffix is not a direct substitute. Compare the installed type plate and reference VIA0701D01A0000 before order.

FAQ

Is this the smallest iSH model in the batch?

Yes. Its 1.1 Nm standstill torque, 0.31 kW rated output, and low rotor inertia make it the lightest iSH configuration selected for this batch.

Which shaft configuration does this exact model use?

It uses a smooth shaft. The coupling, hub, key, axial retention, and permitted shaft loads must match this mechanical version.

What feedback device is specified?

The exact configuration uses SinCos SKS36 singleturn absolute feedback. The controller project and feedback interface must be checked before replacement.

Does this model include a holding brake?

No. This exact suffix does not include a holding brake. The machine must provide a safe means of retaining any gravity-loaded or mechanically unstable axis.

Is this iSH model only a motor?

No. The iSH assembly integrates the motor, power stage, digital servo controller, feedback, and electronic type plate. It operates within the matching PacDrive iSH power and communication system.

What should be verified before ordering a replacement?

Compare iSH070/60011/0/0/00/0/00/00/00, reference VIA0701D01A0000, shaft, sealing, encoder, brake, hybrid connector, PS-5 and DB-5 architecture, SERCOS layout, firmware, and controller project. The complete suffix must match.