ELAU iSH070/60017/0/0/00/0/00/00/00 1.7Nm Smooth Shaft Singleturn Integrated Servo Motor

The ELAU iSH070/60017/0/0/00/0/00/00/00 is a decentralized PacDrive iSH servo module that combines a synchronous motor, power stage, digital servo controller, feedback system, and electronic type plate in one motor-mounted assembly. Its iSH070/60017 motor body provides 1.7 Nm standstill torque and 7.6 Nm peak torque, with 1.15 Nm rated torque at 6000 rpm and 0.72 kW rated output.

This exact suffix specifies the smooth shaft, SinCos SKS36 singleturn absolute feedback, without a holding brake, and no shaft seal, IP54 shaft side except IP40 in IM V3, IP65 housing. The configuration supports mid-range iSH070 applications that need more torque than the 60011 body while retaining a smooth shaft and uncomplicated no-brake layout. It differs from other iSH070/60017 pages through the 1.7 Nm iSH070 body with singleturn feedback, no shaft seal, and no brake. Reference VIA0702D01A0000 may also appear on the type plate or in installed-system records, but the complete iSH type code remains the primary selection key.

Key Features

· Motor, power amplifier, servo controller, and electronic type plate integrated at the axis

· 1.7 Nm standstill torque with 6000 rpm rated speed

· Smooth shaft and no shaft seal, IP54 shaft side except IP40 in IM V3, IP65 housing

· SinCos SKS36 singleturn absolute feedback for decentralized position control

· Without holding brake in the exact encoder-brake configuration

· Hybrid connection reduces separate cabinet drive hardware and axis cabling

Typical Applications

· Distributed feeder and registration axes

· Compact conveyor modules

· Labeling and packaging stations

· Light rotary cutting mechanisms

· Replacement in iSH070/60017 installations

Compatibility and Selection Note

This model belongs to the legacy PacDrive iSH architecture and must be matched by the complete code iSH070/60017/0/0/00/0/00/00/00. Confirm PS-5 and DB-5 system compatibility, hybrid cable pinout, SERCOS topology, controller project, DC bus, 24 V control supply, shaft interface, sealing, encoder type, brake wiring, and optional-module code. A separate SH motor or a different iSH suffix is not a direct substitute. Compare the installed type plate and reference VIA0702D01A0000 before order.

FAQ

How does this model sit between iSH070/60011 and iSH070/60022?

It provides 1.7 Nm standstill torque, placing it between the 1.1 Nm iSH070/60011 and the 2.2 Nm iSH070/60022 while keeping the same 6000 rpm rated speed.

Which shaft configuration does this exact model use?

It uses a smooth shaft. The coupling, hub, key, axial retention, and permitted shaft loads must match this mechanical version.

What feedback device is specified?

The exact configuration uses SinCos SKS36 singleturn absolute feedback. The controller project and feedback interface must be checked before replacement.

Does this model include a holding brake?

No. This exact suffix does not include a holding brake. The machine must provide a safe means of retaining any gravity-loaded or mechanically unstable axis.

Is this iSH model only a motor?

No. The iSH assembly integrates the motor, power stage, digital servo controller, feedback, and electronic type plate. It operates within the matching PacDrive iSH power and communication system.

What should be verified before ordering a replacement?

Compare iSH070/60017/0/0/00/0/00/00/00, reference VIA0702D01A0000, shaft, sealing, encoder, brake, hybrid connector, PS-5 and DB-5 architecture, SERCOS layout, firmware, and controller project. The complete suffix must match.